MABClay DanaLux
Inspired by nature, perfected by science
True African Architecture
An earthen surface, perfected
MABClay DanaLux bridges millennia of African earthen craft with the demands of the contemporary interior. From the mud walls of ancestral homesteads to refined modern surfaces, it is a premium clay and hydraulic lime plaster that breathes, regulates and endures, delivering living walls of extraordinary character. Built from 100% natural minerals with zero VOC, it is applied in two fine coats and sealed with natural carnauba wax.
Performance at a Glance
Engineered from the earth
Surface Aesthetics
Four signature finishes
Each finish is achieved through application technique. Same natural product, a different artisanal result on every wall.
Smooth
A refined, even surface worked with a stainless steel trowel. Calm and contemporary, ideal for minimal interiors.
Patina
Subtle tonal movement built in layers, giving an aged, lived-in character that shifts gently across the wall.
Rustic
An artisanal, tactile surface with natural relief. Warm, grounded and full of visible craft.
Burnished
Polished firmly while curing to draw out a soft, lustrous sheen, without any added product.
Earthy Colours Collection
Nature's palette
Every colour is drawn from the natural earth mineral spectrum. Bespoke tinting is available on request.
Why DanaLux
The benefits of clay and lime
Breathable Walls
Microporous clay lets walls absorb and release moisture vapour, preventing condensation and damp without mechanical ventilation.
Humidity Regulation
Absorbs excess moisture in humid conditions and releases it when dry, stabilising indoor humidity between 45 and 65% RH.
Thermal Mass
Clay and lime store warmth and release it slowly, moderating temperature swings and aiding passive comfort.
Zero VOC, Non-Toxic
100% natural minerals. No volatile compounds, no synthetic biocides, no off-gassing. Safe for children and sensitive spaces.
Antibacterial
The high pH of lime forms a naturally alkaline surface that inhibits mould, mildew and bacteria, with no chemical additives.
Acoustic Comfort
The mineral mass absorbs sound energy, reducing reverberation and echo across residential and hospitality interiors.
Sustainable & Circular
Earth-sourced, solvent-free and biodegradable. Supports green building credits under LEED, BREEAM and Green Star.
Living Aesthetic
No two applications are alike. Natural movement during curing gives a depth and warmth synthetic materials cannot replicate.
Ease of Repair
Patch repairs re-bond to the mineral base at a molecular level, so localised damage touches up without visible joints.
How to apply DanaLux
Surface Preparation
Ensure the substrate is clean, dry, sound and free of grease or loose particles. Fill cracks and prime absorbent surfaces with a diluted clay primer or PVA.
First Coat
Apply with a stainless steel trowel, sponge float or brush in 1 to 2 square metre sections at 0.4mm nominal thickness. Texture as desired for your chosen finish.
Dry Between Coats
Allow 12 to 24 hours between coats. Do not force-dry. Hold ambient temperature between 10 and 30 degrees and keep out of direct sunlight while curing.
Second Coat and Finish
Apply the second coat to full coverage and work in your finish: smooth, patina, rustic or burnished. Allow 24 to 48 hours before sealing.
Carnauba Wax Sealer
Apply the first wax coat with a soft cloth in circular motions, buff when dry, then apply a second coat for full protection and your chosen sheen.
Technical Data
Specification and detail
| Specification | Detail | Notes |
|---|---|---|
| Base Composition | Natural Clay and Hydraulic Lime | Mineral binder, zero VOC |
| Application Method | Trowel, Float or Sponge | Technique determines finish |
| Substrate | Plasterboard, Brick, Cement, Lime | Must be primed and dry |
| Coverage | 3 m² per litre, per coat | On smooth substrate |
| Applied Thickness | 0.4 mm per coat | Nominal wet film |
| Base Coats | 2 coats | Allow full dry between coats |
| Sealer | Carnauba wax, 2 coats | Natural botanical wax |
| Drying, touch | 2 to 4 hours | Conditions dependent |
| Recoat | 12 to 24 hours | Full mineral cure at 28 days |
| Use | Interior | Protected environments |
| Colour Range | Earthy Tones Collection | Bespoke tinting available |
Ideal Applications
Coverage & Pricing
The complete kit, one price
- Covers approximately 7 to 8 m² finished (standard finish)
- Twelve earthy tones, bespoke tinting available
- Supplied with full application guidance
- 3 m² per litre, per coat
- Two base coats at 0.4 mm for full depth
- Seal with two coats of carnauba wax
- Interior use, on primed substrates
- Touch dry in 2 to 4 hours, recoat in 12 to 24 hours
- Full mineral cure at 28 days
- A full 15 m² wall needs about two kits
Larger DanaLux trade packs available. Contact us for project and trade pricing.
Bring DanaLux to your walls
Tell us the walls, the finish and the location. We send pricing for supply or applied installation.
Request a Quote